Superb Internet Corp. is pleased to offer a Double Base RAM – New Superb Standard bonus, free of charge. All Superb dedicated servers now come with double the base RAM. This amazing bonus is automatically selected for you when you place your order.
Category: Troubleshooting
How do I tell if my NIC is going bad?
Introduction It is worth noting that network interface cards (NICs or also ethernet cards) are one of the rarest failures. In the vast majority of times a server goes offline, it is more likely to be an issue higher up on the network (blackholing, null routing, bad cable, etc.) than a failed NIC. However there […]
How do I tell if my RAM is going bad (Linux)?
Introduction It should be noted that RAM failures are extremely rare. The most common causes for RAM failure are humidity, electrostatic discharge, and dust; in a climate-controlled data center these conditions are nonexistent. The more common failure is the DIMM slot on the motherboard itself. However any of the symptoms listed on this page should […]
How do I tell if my RAM is going bad (Windows)?
Introduction It should be noted that RAM failures are extremely rare. The most common causes for RAM failure are humidity, electrostatic discharge, and dust; in a climate-controlled data center these conditions are nonexistent. The more common failure is the DIMM slot on the motherboard itself. However any of the symptoms listed on this page should […]
How do I tell if my hard drive is going bad (Windows)?
Introduction There are a few common symptoms of a hard drive that is starting to age with Windows installed. Below are a few of these cases and recommendations for action. Symptoms System freezing: while working on the server remotely, or while the server is under normal operation the operating system will freeze. This often […]
How do I tell if my hard drive is going bad (Linux)?
Introduction There are a few common symptoms of a hard drive that is starting to age with Linux installed. Of course you should use SMART tools to keep an eye on your hard drive performance on a regular basis. Symptoms System freezing: while working on the server remotely, or while the server is under […]
How do I use SMART tools to check on my server’s hard drive?
Introduction One of the easiest ways to stay ahead of the curve on hard drive failures is to take advantage of SMART monitoring. SMART, or Self-Monitoring, Analysis, and Reporting Technology, is a is a monitoring system for computer hard disks to detect and report on various indicators of reliability in the hope of anticipating […]
